Projecting Wired
Your classroom has been supplied with an HDMI to USB C video cord. The HDMI end of the cord should be plugged into the wall on a port labeled HDMI 1 or HDMI 2, either port will work. Plug the smaller end of the cord (USB C) into the usb C port on your computer. If you do not automatially see your computer screen on the projector screen, use the projector remote and click on "search source".
Projecting Wirelessly
To project wireless on either a mac or pc open your iProjection software and follow the steps below.
1. Select the projection mode by using the settings shown in the picture below.
2. Once you click OK, you'll see the screen pictured below. In this screen, you'll need to click on Manual Search and enter the IP address of the projector. You can find the IP address of your projector by locating the LAN button on your projector remote and pushing it twice. The IP address will be projected on the projector screen. 
3. On the bottom of your iProjection software window click on Connect. You should now see your computer screen on the projector screen.
4. Tip: For easy access to your classroom projector next time, drag your projector listed in the top window into the Profile folder on the left hand column. Then, the next time you launch iProjection, all you'll need to do is click on your classroom projector listed in your Profile folder. 